Page 4© 2011 Active Research Limited
Important Notices
Actisense and the Actisense logo are registered
trademarks of Active Research Limited. All rights are
reserved. The contents of this manual may not be
transferred or copied without the express written
permission of Active Research Limited. All other
trademarks are the property of their respective owners.
The Actisense NMEA Data Multiplexer / Combiner /
Autoswitch (NDC-4) is intended for use in a marine
environment,primarilyforbelowdeckuse.Iftheunitisto
beusedinamoresevereenvironment,suchusemaybe
considered misuse under the seller’s guarantee.
The ActisenseNDC-4 hasbeencertied tocomplywith
the European directive for Electromagnetic Compatibility
(EN60945), and is appropriately CE marked. Operation of
the unit should be in conjunction with appropriate CE
approved shielded connectors and cabling used in
accordance with the CE directive EN60945. Any EMC
related issues should be reported to Active Research
Limited immediately to allow the company to rectify or
resolve EMC related problems in accordance with its
obligationsunderEN60945.
If the unit is connected such that compliance failure occurs
beyondthecompany’scontrol,thecompanyshallnotbe
heldresponsibleforcompliancefailureuntilsuitableEMC
guidelinesforconnectionareseentohavebeentaken.
Notices
The products and specications described in this guide
maybechangedwithoutpriornotice.Toobtainthelatest
information visit www.actisense.com.
Active Research Limitedwillnotbeliableforinfringement
of copyright, industrial property right, or other rights of a
thirdpartycaused bytheuse of informationordrawings
describedinthismanual.
The NGW-1-USB must be used in accordance with the
manufacturers instructions. Active Research Limited will
notbeheldresponsibleforanydamageorinjury,director
otherwise, as a result of failure to adhere to these
instructions.
The NDC-4 does not validate the NMEA data it receives in
any way. Neither the NMEA sentence checksum, nor the
data contained within the NMEA sentence is validated.
Therefore, the electronic device(s) supplying the NDC-4
with NMEA data retain(s) the sole responsibility for the
NMEA data’s validity.
Foreword
Actisense recognises that instructions are often skipped,
so we have aimed to write this document in an informative,
yet direct manner that will aid the user. We have tried to
cover all the points a typical user may need to know.
Please read all sections before installing and using the
Actisense NMEA Data Multiplexer product and any
related software programs.
Introduction
The Actisense NDC product range developed out of the
requirementtosolvetwofundamentalproblems with the
existing marine industry NMEA 0183 communications
standard.
In theory, the NMEA 0183 standard allows any suitably
designed marine electronic device to share its gathered
information with any other device on a vessel.
Unfortunately, thereisoneverylarge drawbackwiththis
standard - only one device on a connected network can
actually send data (a single talker), with multiple devices
(determined by the current limit of the sending unit)
listening to that data (multiple listeners).
If the vessel owner has an instrument that ideally requires
the data output of two or more devices, for example a
chart-plotter, then the owner has no alternative but to
settle on connecting only the most important device (that
which supplies the most used information), normally that is
theGPSunit.Allotherdevicescannotbeused.
What happens if the owner prefers the vessels gyro
compass heading output to that of the GPS, or requires
thatthecurrentdepthbedisplayedontheplottedchartto
helpavoidthepossiblecaseofrunningthevesselaground
onashiftingsandbank?TheNMEA0183standardcannot
supply an answer to those questions as it can handle only
one transmitting device.
Thesetwoelementaryproblemscanbesolvedsimplyand
easily with the Actisense NMEA Data Multiplexer’s very
exibledesignapproach.
Alternately, if the vessel has two or more identical NMEA
devices (e.g. GPS’s or depth sounders) the system
solutioncouldbetousetheNDC-4asanNMEAAutoswitch
to select the highest priority source.
Full information on the complete Actisense product range
canbefoundonthe Actisense website (www.actisense.
com).
Kommentare zu diesen Handbüchern