Actisense NMEA 0183 Bedienungsanleitung PDF herunterladen (Seite 26)

Please note that during this updating process, it is vital that

the Control Centre and NDC hardware are not interrupted.

Therefore, the following precautions are suggested:–

1. Ensure there are no programs active/running on the

PC other than the Control Centre.

2. Check that the USB / RS232 cable between the PC

and the NDC hardware is secure.

3. Conrm that the battery supply to the NDC hardware

is secure.

If the Flash hardware operation is interrupted, the Port

Congurations could become corrupted. The user

should identify and remove the reason for the previous

interruption before re-attempting to ash the hardware

again (by pressing the Send to Hardware control button

on the appropriate tab).

The Flash Hardware window consists of four LED’s that

indicate the ash operations current status, a progress bar

indicating percentage completed of the current stage, and

a ash program counter that indicates how many times the

NDC hardware’s Inclusion List has been re-programmed.

The Success LED indicates the nal outcome of the data

transfer. If it does not light up green, the NDC Hardware

Connection Status will indicate a more detailed cause

and the process should be performed again.

Flash Hardware window

The Flash Hardware window is displayed for the duration of the Port Conguration update operation.

Figure 14 – Flash Hardware Control window

Advanced Features

The following windows and/or tabs will only be of interest to the advanced user, as they are not vital for the conguration

of the NDC hardware. They do however, explain the useful diagnostic and monitoring features available.

These advanced windows are hidden by default, and all novice users should advance past this section to the Using the

NDC ActiPatch section that follows.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Keine Kommentare

Actisense NMEA 0183 Bedienungsanleitung Seite 26